ServicesSpecialised construction and finishing works

The trades,
one at a time.

Individual specialised and finishing trades on your project: masonry and concrete, roofing, façade and waterproofing, tiling, flooring, painting and plaster, drywall, carpentry, joinery, aluminium and metalwork, welding and assembly, earthworks and demolition where permitted, and electrical, plumbing and HVAC through licensed installers.

Our role

Specialist contractor

Unit

One trade, or several

Regulated trades

Through licensed installers

Sites

Ours or yours

What it is

A finishing trade is the last thing done and the first thing seen.

Not every project needs a general contractor. Sometimes it needs a roofer, a façade crew, a tiler who can hold a line down a forty-metre corridor, or a team to take a building out of the ground. We carry the trades below as direct works with our own crews, and deliver electrical, plumbing and HVAC through the licensed installers the law requires, coordinated by us. Earthworks, excavation and demolition are done where legally permitted, with the permits in place first.

What you get

Six things you
hold in your hand

Not promises. Each of these is a person, a document or a report you receive, and can point to if it is missing.

  1. A trade crew with a lead

    The right trade, led by someone who has done it for years and answers for the result.

  2. Samples and mock-ups

    Where the finish matters, a sample or a first section approved before the rest is done.

  3. A method statement

    How the work will be done, protected and made safe, agreed before it starts.

  4. Materials to specification

    Bought by us to the specification, or yours checked on arrival and used correctly.

  5. Stage inspections

    Substrate, first fix, finish: each checked and recorded before the next covers it.

  6. A cleaned, handed-over area

    The work protected until handover and the area left clean, not left for the next trade to tidy.

Scope

The trades

Everything below is inside the engagement. Anything not listed is named as an exclusion in the quote, so there is no third category.

  1. 01

    Electrical installations

    Through licensed installers, subject to the licensing and technical requirements that apply.

  2. 02

    Plumbing, water supply and sewage

    Through licensed installers, from mains connection to the last fitting.

  3. 03

    Heating, ventilation and air-conditioning

    Through licensed installers, sized and commissioned to the building.

  4. 04

    Masonry, concrete and reinforced concrete

    Walls, slabs, columns and beams, by our own crews.

  5. 05

    Roofing, façade, insulation and waterproofing

    The envelope trades where most buildings leak, done to the detail.

  6. 06

    Tiling, flooring, painting and plastering

    The finishes a client runs a hand over.

  7. 07

    Drywall and interior finishing

    Partitions, ceilings, boarding and decoration.

  8. 08

    Carpentry, joinery, aluminium and metalwork

    Timber, aluminium and steel fabricated and fitted.

  9. 09

    Welding and assembly

    Structural and secondary steel, railings, frames and fixings.

  10. 10

    Earthworks, excavation and demolition

    Site preparation, excavation and demolition where legally permitted, with permits in place.

Fit

When to choose it

  • You need one or two trades done well, not a whole building.
  • Your general contractor is short of a specialist.
  • A finish has to be right the first time.
  • Ground has to be prepared or a building taken down.

Used for

Typical works

  • A façade renewal
  • A roof replacement
  • An apartment finishing programme
  • An office fit-out
  • A hall floor and cladding
  • Site clearance and excavation

Questions

Asked before
signing

The situations clients ask about before a works package. Anything else, ask directly.

  1. Do you do the electrics and plumbing yourselves?

    Regulated installations are done by licensed installers, as the law requires. We bring them in, coordinate them with the other trades and remain your single point of contact for the package.

  2. Can you match an existing finish?

    Usually, with a sample first. Old plaster, tiles and timber can be matched more often than people expect, and where they cannot we say so before starting.

  3. Is there a minimum size of job?

    There is a size below which a crew's travel and setup cost more than the work. We tell you when a job is that small, and where we can, we combine it with others nearby.

  4. Who supplies the materials?

    Either of us, stated in the quote. We buy at contractor prices to the specification; if you prefer to supply, we tell you exactly what and when, and check it on arrival.

  5. Do you obtain demolition permits?

    Demolition and excavation happen only where legally permitted and with permits in place. The permit is the owner's; we tell you what is needed and can prepare the technical parts.

  6. Can you work while the building is occupied?

    Often, in phases and with protection and dust control planned. Some trades cannot be done around people, and we say which before quoting.

Other services

Elsewhere in
the company

If this page is not the shape your project needs, one of these will be. Each has its own terms and its own sequence.

Start here

One trade, done properly?

Tell us the trade, the area and when the workface will be ready. We reply with a date to measure and a price per quantity.

info@avonurban.rs

In one line

One trade done properly is worth more than five done nearly.

The form already knows which service you are asking about. We read every enquiry ourselves and reply within one working day.